2014
Koo, B., Liu, Y., Zou, J., Chattopadhyay, A. and Dai, L., “Study of Glass Transition Temperature (Tg) of Novel Stress-Sensitive Composites using Molecular Dynamic Simulation,” Modelling and Simulation in Materials Science and Engineering, reference: MSMSE-100304.R2 (Accepted)
Zou, J., Liu, Y., Shan, B., Chattopadhyay, A. and Dai, L., “Early Damage Detection in Epoxy Matrix Using Cyclobutane-based Polymers,” Smart Materials and Structures, 2014. (Accepted).
Hasan, Z., Chattopadhyay, A., Liu, Y., “A Multiscale Approach to the Analysis of Composite Joints Incorporating Nanocomposites” Journal of Aircraft, 2014. (Accepted).
Yekani Fard, M., Raji, B. and Chattopadhyay, A., “The Ration of Flexural Strength to Uniaxial Tensile Strength in Bulk Epoxy Resin Polymeric Materials,” Polymer Testing, 2014, doi: 10.1016/j.polymertesting.2014.09.002.
Kim, I., Yekani Fard, M. and Chattopadhyay, A., “Investigation of Bridge Pier Scour Prediction Model for Safe Design and Inspection”, Journal of Bridge Engineering, 2014. DOI:10.1061/(ASCE)BE.1943-5592.0000677 (In publication).
Das, S., and Chattopadhyay, A., “Structural Health Monitoring of Composites using Wave Based Approach and Matching Pursuit Decomposition Technique,” Journal of Smart Materials and Structures (in press).
Deenadayalu, C. and Chattopadhyay, A., “Characterization of Delamination using Neural Networks,” Int. Journal of Structural Health Monitoring (in press).
Neerukatti, R. K., Yekani Fard, M. and Chattopadhyay, A., “Gaussian process based prognosis model for bridge scour”, International Journal of Engineering Research and Technology, Vol 3, 6, 565-573, 2014.
Chakraborty, D., Kovvali, N., Papandreou-Suppappola, A., Chattopadhyay, A., “An adaptive learning damage estimation method for structural health monitoring” Journal of Intelligent Material Systems and Structures, 14 April 2014. DOI: 10.1177/1045389X14522531
Neerukatti, R. K., Liu, K. C., Kovvali, N. and Chattopadhyay, A.,”Fatigue life prediciton using hybrid prognosis for structural health monitoring”, Journal of Aerospace Information Systems, Vol 11, 4, 211-232, 2014.
J Zhang, J Johnston, and A Chattopadhyay. “Physics‐based multiscale damage criterion for fatigue crack prediction in aluminium alloy.” Fatigue & Fracture of Engineering Materials & Structures, Vol. 37, 2, 119-131, 2014.
Yekani Fard, M., Sadat, S.M., Chattopadhyay, A., and Raji, B., “Damage Characterization of Surface and Subsurface Defects in Stitch-bonded Biaxial Carbon/Epoxy Composites.” Composites Part B, Vol. 56, 821-829, 2014.
Yekani Fard, M., Chattopadhyay, A. and Liu, Y., “Influence of Load Type and Stress Gradient on Flexural Strength of an Epoxy Resin Polymeric Material,” Journal of Aerospace Engineering, Vol. 27, 55-63, Jan/Feb 2014.
2013
Yekani Fard, M., Chattopadhyay, A., Liu, Y., “Nonlinear 3PB and 4PB Flexural Behavior and Softening Localization for Epoxy Resin E 863 Using Digital Image Correlation Technique,” J. of Experimental Techniques. DOI: 10.1111/ext. 12050, 2013.
Borkowski, L., Liu, K.C., Chattopadhyay, A., “From Order to Disorder: The Effect of Microstructure on Composite Mechanical Performance,” Computers, Materials & Continua (CMC), Vol. 37, 3, 161-193, 2013.
Liu, Y. and Chattopadhyay, A., “Low velocity impact damage monitoring of a sandwich composite wing,” Journal of Intelligent Material Systems and Structures, Vol. 24, 17, 2074-2083, 2013.
Borkowski, L., Liu, K.C., and Chattopadhyay, A., “Fully Coupled Electromechanical Elastodynamic Model for Guided Wave Propagation Analysis,” Journal of Intelligent Material Systems and Structures, Vol. 24, 13, 1647-1663, 2013.
Zhang, J, Liu, K.C., Luo, C, and Chattopadhyay, A, “Crack initiation and fatigue life prediction on aluminum lug joints using statistical volume element–based multiscale modeling.” Journal of Intelligent Materials Systems and Structures, Vol. 24, 17, 2097-2109, 2013.
Seaver, M., Chattopadhyay, A., Papandreou-Suppapola, A., Kim, S. B., Kovvali, N., Farrar, C. R., Triplett, M. H., and Derriso, M. M. “Workshop on Transitioning Structural Health Monitoring Technology to Military Platforms”, Journal of Intelligent Material Systems and Structures, Vol. 24, 17, 2063-2073, 2013.
2012
Moncada, A.M., Chattopadhyay, A., Bednarcyk, B.A., & Arnold, S.M., “Micromechanics-Based Progressive Failure Analysis of Composite Laminates Using Different Constituent Failure Theories,” Journal of Reinforced Plastics and Composites, Vol. 31, 21, 1467-1487, 2012.
Peralta; P., Villarreal, T., Atodaria, I., Chattopadhyay, A., “Mechanical length scales and their link to fatigue crack growth kinetics in beta-annealed Ti-6Al-4V,” Scripta Materialia, Vol. 66, 1, 13-16, 2012.
Liu, Y., Yekani Fard, M., Chattopadhyay, A., Doyle, D., “Damage assessment of CFRP composites using a time-frequency approach” Journal of Intelligent Material Systems and Structures, Vol. 23, 4, 397-413, 2012.
Mohanty, S., Chattopadhyay, A., Rajadas, J., “Dynamic strain mapping and real- time damage-state estimation under random fatigue loading,” AIAA Journal, Vol. 50, 4, 769-777, 2012.
Liu; Y., Yekani Fard, M., Rajadas, A., Chattopadhyay, A., “A biomimetic structural health monitoring approach using carbon nanotubes”, Journal of Materials, Vol. 64, 7, 802-807, 2012.
Yekani Fard, M., Chattopadhyay, A., and Liu, Y., “Multi-linear stress-strain and closed form moment curvature response of epoxy resin materials,” International Journal of Mechanical Sciences, Vol.57, 1, 9-18, April 2012.
Yekani Fard, M., Liu, Y., and Chattopadhyay, A., “Analytical Solution for Flexural Response of Epoxy Resin Materials,” Journal of Aerospace Engineering, ASCE, Vol. 25, 3, 395-408, July 2012.
Yekani Fard, M., Liu, Y., and Chattopadhyay, A., “Characterization of Epoxy Resin Including Strain Rate Effects Using Digital Image Correlation System,” Journal of Aerospace Engineering, ASCE, Vol. 25, 2, 308-319, April 2012.
Yekani Fard, M., Liu, Y., and Chattopadhyay, A., “A simplified approach for flexural behavior of epoxy resin materials,” The Journal of Strain Analysis for Engineering Design, Vol. 47, 1, 8–31, January 2012.
2011
S. Mohanty; A. Chattopadhyay; P. Peralta; S. Das, “Bayesian Statistic Based Multivariate Gaussian Process Approach for Offline/Online Fatigue Crack Growth Prediction”, Experimental Mechanics, Vol. 51, 6, 833-843, July 2011.
Liu, Y., Kim, S. B., Chattopadhyay, A., Doyle, D., “Application of system-identification techniques to health monitoring of on-orbit satellite boom structures,” Journal of Spacecraft and Rockets. Vol. 48, 4, 589-598, 2011.
Hiche, C., Coelho, Clyde, Chattopadhyay, A. “A Strain Amplitude-Based Algorithm for Impact Localization on Composite Laminates”, Journal of Intelligent Material Systems and Structures, Vol. 22, 17, 2061-2067, November 2011.
Liu, K.C., Chattopadhyay, A., Bednarcyk, B., and Arnold, S.,”Efficient Multiscale Modeling Framework for Triaxially Braided Composites using Generalized Method of Cells,” Journal of Aerospace Engineering, Vol. 24, 2, 162-169, April 2011.
Luo, C., Chattopadhyay, A., “Prediction of fatigue crack initial stage based on a multiscale damage criterion”, International Journal of Fatigue, Vol. 33, 3, 403-413, March 2011.
Yekani Fard, M., Liu, Y., and Chattopadhyay, A., “Nonlinear Flexural Behavior and Moment Curvature Response of Epoxy Resin Using Digital Image Correlation Technique,” Journal of Materials Science and Engineering,” Vol. 5, pp. 212-219, February 2011.
Coelho, C., Hiche, C., and Chattopadhyay, A., “An application of support vector regression for impact load estimation using fiber bragg grating sensors,” Structural Durability and Health Monitoring, Vol. 7, 1-2,65-81, 2011.
2010
Soni, S., Das, S. and Chattopadhyay, A., “Sensitivity Studies on Sensor Selection for Crack Growth Investigation,” Smart Materials and Structures, Vol. 19, 10, 105015-10023, October 2010.
Liu, Y., Mohanty, S., Chattopadhyay, A., “Condition Based Structural Health Monitoring and Prognosis of Composite Structures under Uniaxial and Biaxial Loading”, Journal of Nondestructive Evaluation, Vol. 29, 3, 181-188, 2010.
Ghoshal, A., Prosser, W. H, Kim H. S., Chattopadhyay, A. and Copeland, B., “Development of Embedded Piezoelectric Acoustic Sensor Array Architecture,” Microelectronics Reliability, Vol. 50, 6, 857-863, June 2010.
Mohanty, S., Chattopadhyay, A., Wei, J and Peralta, P., “Unsupervised Time-Series Damage State Estimation of Complex Structure Using Ultrasound Broadband Based Active Sensing”, Structural Durability & Health Monitoring Journal, Vol. 130, 1, 101-124, 2010.
Das, S., Chattopadhyay, A. and Srivastava, N. A., “Classifying Induced Damage in Composite Plates using One-Class Support Vector Machines,” AIAA Journal, Vol. 48, 4, 705-718, April 2010.
Mohanty, S., Chattopadhyay, A. and Peralta, P., “Adaptive Residual Useful Life Estimation of a Structural Hotspot”, Journal of Intelligent Material Systems and Structures special issue on SHM, Vol. 21, 321-335, February 2010.
2009
Mohanty, S., Chattopadhyay, A., Peralta, P., and Das, S., “Off-line and On-Line Fatigue Crack Growth Prediction Using Multivariate Gaussian Process”, Journal of Experimental Mechanics, DOI 10.1007/s11340-010-9394-7, 2009.
Chattopadhyay, A., Peralta, P., Papandreou-Suppappola, A. and Kovvali, N., “A Multidisciplinary Approach to Structural Health Monitoring and Damage Prognosis of Aerospace Hotspots”, Special issue on Flight Structures Fundamental Research in the USA Royal Aeronautical Society Aeronautical Journal, Vol. 113, 1150, 799-810, December 2009.
Luo, C., Wei, J., Parra-Garcia, M., Chattopadhyay, A., and Peralta, P., “Fatigue Damage Prediction in Metallic Materials Based on Multiscale Modeling”, AIAA Journal, Vol. 47, 11, 2567-2576, November 2009.
Mohanty, S., Chattopadhyay, A., Wei, J and Peralta, P., “Unsupervised Time-series Fatigue Damage State Estimation of Complex Structure Using Ultrasound Based Narrowband and Broadband Active Sensing,” Structural Durability and Health Monitoring Journal, Vol. 5, 3, 227-250, 2009.
Mohanty, S., Chattopadhyay, A., Wei, J and Peralta, P., “Real time Damage State Estimation and Condition Based Residual Useful Life Estimation of a Metallic Specimen under Biaxial Loading”, Structural Durability & Health Monitoring Journal, Vol.5, 1, 33-55, 2009.
Zhou, W., Kovvali, N., Papandreou-Suppappola, A., Cochran, D., Chattopadhyay, A. and Reynolds, W., “On the Use of Hidden Markov Modeling and Time-frequency Features for Damage Classification in Composite Structures, ”Journal of Intelligent Material Systems and Structures, special issue on Information Management in Structural Health Monitoring, Vol. 20, 1271-1288, July 2009.
Chakraborty, D., Kovvali, N., Wei, J., Papandreou-Suppappola, A., Cochran, D. Chattopadhyay, A. “Damage Classification Structural Health Monitoring in Bolted Structures Using Time-Frequency Techniques”, Journal of Intelligent Material Systems and Structures, Vol. 20, 11, 1289-1305, July 2009.
Soni, S., Das, S. and Chattopadhyay, A., “Simulation of Damage-features in a Lug Joint using Guided Waves”, Journal of Intelligent Material Systems and Structures, Vol. 20, 12, 1451-1464, July 2009.
Farrar, Charles, Chattopadhyay, A. and Park, Gyuhae, “Special Issue on Information Management in Structural Health Monitoring”, Journal of Intelligent Material Systems and Structures, Vol. 20, 11, 1269-1270, July 2009.
Coelho, C. K. and A. Chattopadhyay, “A Hierarchical Classification Scheme for Computationally Efficient Damage Classification,” Proceedings of the IMechE, Part G, Journal of Aerospace Engineering, Vol. 223, G5, 497-505, July 2009.
Mohanty, S., Das, S., Chattopadhyay, A. and Peralta, P., “Gaussian Process Time Series Model for Life Prognosis of Metallic Structures”, Journal of Intelligent Material Systems and Structures, Vol. 20, 8, 887-896, May 2009.
Das, S., Kyriakides, I., Chattopadhyay, A. and Papandreou-Suppappola, A., “Monte Carlo Matching Pursuit Decomposition Method for Damage Quantification in Composite Structures”, Journal of Intelligent Material Systems and Structures, Vol. 20, 6, 647 – 658, April 2009.
Das, S., Chattopadhyay, A. and Zhou, X., “Acoustic Based Structural Health Monitoring for Composites Using Optimal Sensor Placement: Analysis and Experiment.” Journal of Reinforced Plastics and Composites, Vol. 28, 1, 83-97, January 2009.
2008
Zhu, L., Chattopadhyay, A., and Goldberg, R., K., “Failure Model for Rate Dependent Polymer Matrix Composite Laminates under High Velocity Impact,” Journal of Aerospace Engineering Vol. 21, 3, 132-139, July 2008.
W. Zhou, N. Kovvali, A. Papandreou-Suppappola, D. Cochran, A. Chattopadhyay, “Classification of Damage Structures Using Hidden Markov Models,” Journal of Intelligent Material Systems and Structures, special issue on Structural Health Monitoring, (special issue publication date May 2008).
2007
Kim, H.S., Kim, J., Choi, S., Ghoshal, A., and Chattopadhyay, A., “Modal-Strain-Based Damage Index of Laminated Composite Structures Using Smooth Transition of Displacements.” AIAA Journal, Vol.45, 12, 2972-2978, December 2007.
Chattopadhyay, A., Das, S., and Coelho, C. K., “Damage Diagnosis using a Kernel-based Method,” Insight – Non-Destructive Testing and Condition Monitoring, Vol. 49, 8, 451-458, August 2007.
Ghoshal, A.., Martin, W.N., Schulz, M.J., Chattopadhyay, A., Prosser, W.H., and Kim, H.S. “Health Monitoring of Composite Plates using Acoustic Wave Propagation, Continuous Sensors and Wavelet Analysis,” Journal of Reinforced Plastics and Composites, Vol. 26, 1, 95-112, 2007.
2006
Zhu L., Chattopadhyay, A. and Goldberg, R., “Multiscale Analysis Including Strain Rate Dependency for Transient Response of Composite Laminated Shells,” Journal Reinforced Plastics Composites, Vol. 25, 17, 1795-1831, 2006.
Swann, C. R., and Chattopadhyay, A., “Optimization of Piezoelectric Sensor Location for Delamination Detection in Composite Laminates.” Engineering Optimization, Vol. 38, 5, 511-528, July 2006.
Zhu, L., Chattopadhyay, A., and Goldberg, Robert K., “Nonlinear Transient Response of Strain Rate Dependent Composite Laminated Plates Using Multiscale Simulation,” Int. Journal of Solids and Structures, 43, 2602-2630, May 2006.
2005
Ghoshal, A., Martin, W. N., Schulz, M., J., Chattopadhyay, A., Prosser, W. H., “Simulation of Asymmetric Lamb Waves for Sensing and Actuation in Plates,” Shock and Vibration Journal, Vol. 12, 4, 243-271, 2005.
Zhu, L., Kim, H.S., Chattopadhyay, A., and Goldberg, Robert K., “Improved Transverse Shear Calculations for Rate-Dependent Analyses of Polymer Matrix Composites,” AIAA Journal, Vol. 43, 4, 895-905, April 2005.
Ghoshal, A., Kim, H.S., Chattopadhyay, A., and Prosser, W.H., “Effects of Delamination on Transient History of Smart Composite Plates.” Finite Elements in Analysis and Design, Vol. 41, 9-10, 850-874, May 2005.
Munteanu, S., Rajadas, J., Nam, C., and Chattopadhyay, A., “Reduced Order Approach for Aeroelastic Analysis Involving Aerodynamic and Structural Nonlinearities” AIAA journal Vol. 43, 3, 560-571, March 2005.
Chattopadhyay, A, Swann, C., and Ghoshal, A., “Characterization of Delamination in Using Strain-Based Damage Indices,” Journal of Reinforced Plastics and Composites, Vol. 24, 7, 699-711, 2005.
2004
Chattopadhyay, A., and Zhu, L., “Implementation of Improved Transverse Shear Calculations and Higher Order Laminate Theory into Strain Rate Dependent Analysis of Polymer Matrix Composites” NASA TM-2004-213420, 2004.
Kim, H.S., Ghoshal, A., Chattopadhyay, A. and Prosser, W., “Development of Embedded Sensor Models in Composite Laminates for Structural Health Monitoring,” J. of Reinforced Plastic and Composites, Vol. 23, 11, 1207-1240, 2004.
Chattopadhyay, A., Kim, H. S., and Ghoshal, A., “Nonlinear Vibration Analysis of Smart Composite Structures with Delamination using a Refined Layerwise theory,” Journal of Sound and Vibration Vol. 273, 1-2, 387-407, May 21, 2004.
Thornburgh, R. P., Chattopadhyay, A., and Ghoshal, A., “Transient Vibration of Smart Structures Using a Coupled Piezoelectric-Mechanical Theory,” Journal of Sound and Vibration Vol. 274, 1-2, 53-72, July 6, 2004.
Zhou, X., Chattopadhyay, A., and Kim, H. S., “An Efficient Layerwise Shear-Deformation Theory and Finite Element Implementation,” Journal of Reinforced Plastics and Composites, Vol. 23, 2, 131-152, 2004.
2003
Thornburgh, R. P., and Chattopadhyay, A., “Modeling and Optimization of Passively Damped Adaptive Composite Structures,” Journal of Intelligent Material Systems and Structures. Vol. 14, 4-5, 247-256, April/May 2003.
Ghoshal, A., Chattopadhyay, A., Schulz, M., Nam, C., Thornburgh, R. P., and Waldron, K., “Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 14, 8, 521- 537, Aug. 2003.
Kim, H. S., Chattopadhyay, A., and Ghoshal, A., “Dynamic Analysis of Composite Structures with Multiple Delamination Using Improved Layerwise Theory,” AIAA Journal, Vol. 41, 9, 1771-1779, Sept. 2003.
Kim, H. S., Chattopadhyay, A., and Ghoshal, A., “Characterization of Delamination Effect on Composite Laminates Using a New Generalized Layerwise Approach,” Computers and Structures, Vol. 81, 15, 1555-1566, July 2003.
2002
Kim, H. S., Chattopadhyay, A., and Nam, C., “Implementation of a Coupled Thermo-piezoelectric-mechanical Model in the LQG Controller Design for Smart Composite Shells,” Journal of Intelligent Material Systems and Structures, Vol. 13, 713-723, Nov. 2002.
Kim, H. S., Zhou, X., and Chattopadhyay, A., “Interlaminar Stress Analysis of Shell Structures with Piezoelectric Patch Including Thermal Loading,” AIAA Journal, Vol. 40, 12, 2517-2525, Dec. 2002.
Chattopadhyay, A., J.-S. Kim and Liu, Q., “Aeromechanical Stability Analysis and Control of Smart Composite Rotor Blades,” Journal of Vibration and Control, Special Issue on Active Constrained Layer Damping, Vol. 8, 6, 847-860, Sept. 2002.
Thornburgh, R. P. and Chattopadhyay, A., “Simultaneous Modeling of Mechanical and Electrical Response of Smart Composite Structures,” AIAA Journal, Vol. 40, 8, 1603-1610, Aug. 2002.
Radu, A. and Chattopadhyay, A., “Dynamic Stability Analysis of Composite Plates Including Delaminations using a Higher Order Theory and Transformation Matrix Approach,” Int. J. of Solids and Structures, Vol. 39, 7, 1949-1965, April 2002.
Talya, S., Chattopadhyay, A. and Rajadas, J., “Multidisciplinary Design Optimization Procedure for Improved Design of Cooled Gas Turbine Blades,” Engineering Optimization, Vol. 34, 2, 175 -194, March 2002.
2001
Zhou, X., and Chattopadhyay, A., “An Improved Shear Deformation Theory for Laminated Shells Addressing Transverse Stress Continuity,” Advanced Composites Letters, 2001.
Thornburgh, R. P. and Chattopadhyay, A., “Nonlinear Actuation of Smart Composites Using a Coupled Piezoelectric-Mechanical Model,” Smart Materials and Structures, Vol. 10, 4, 743-749, Aug. 2001.
Zhou, X. and Chattopadhyay, A., “Hysteresis Behavior and Modeling of Piezoceramic Actuators,” Journal of Applied Mechanics Transactions of the ASME, Vol. 68, 2, 270-277, March 2001.
Chattopadhyay, A., Gu, H., Nam, C. and Beri, R., “Modeling Segmented Active Constrained Layer Damping Using Hybrid Displacement Field,” AIAA Journal, Vol. 39, 3, 480-486, March 2001.
Thornburgh, R. P. and Chattopadhyay, A., “Unified Approach to Modeling matrix Cracking and Delamination in Laminated Composite Structures,” AIAA Journal, Vol. 39, 1, 153-160, Jan. 2001.
2000
Nam, C., Chattopadhyay, A. and Kim, Y., “Aeroelastic Control of Smart Composite Plate with Delaminations,” Journal of Intelligent Material Systems and Structures, Vol. 11, 11, 868-876, Nov. 2000.
Liu, Q. and Chattopadhyay A., “Improved Helicopter Aeromechanical Stability Analysis Using segmented Constrained Layer Damping and Hybrid optimization” Journal of Intelligent Material Systems and Structures, Vol. 11, 6, 492-500, June 2000.
Rajadas, J. N., Jury, A. R. and Chattopadhyay, A., “Enhanced Multiobjective Optimization Technique with Application to High Speed Aircraft,” Engineering Optimization, Vol. 33, 1, 113- 133, 2000.
Zhou, X., Chattopadhyay, A. and Thornburgh, R. P., “Analysis of Piezoelectric Smart Composites Using a Coupled Piezoelectric-Mechanical Model,” Journal of Intelligent Material Systems and Smart Structures, Vol. 11, 3, 169-179, March 2000.
Liu, Q., Chattopadhyay, A., Gu, H. and Zhou, X., “Use of Segmented Constrained Layer Damping Treatment for Improved Helicopter Aeromechanical Stability,” Smart Materials and Structures, Vol. 9, 4, 523-532, Aug. 2000.
Zhou, X., Chattopadhyay, A. and Gu, H., “Dynamic Responses of Smart Composites Using a Coupled Thermo-Piezoelectric-Mechanical Model,” AIAA Journal, Vol. 38, 10, 1939-1948, Oct. 2000.
Chattopadhyay, A., Radu, A. G. and Dragomir-Daescu, D., “A Higher Order Plate Theory for Dynamic Stability Analysis of Delaminated Composite Plates,” Computational Mechanics, Vol. 26, 3, 302-308, Sept. 2000.
Gu, H., Chattopadhyay, A., Li, J. and Zhou, X., “A Higher order Temperature Theory for Coupled Thermo-Piezoelectric-Mechanical Modeling of Smart Composites,” Int. Journal of Solids and Structures, Vol. 37, 44, 6479-6497, Nov. 2000.
Chattopadhyay, A., Nam, C. and Kim, Y., “Damage Detection And Vibration Control of a Delaminated Smart Composite Plate,” Advanced Composites Letters, Vol. 9, 1, 7-15, 2000.
Nam, C., Chattopadhyay, A. and Kim, Y. H., “Optimal Wing Planform Design for Aerelastic Control,” AIAA Journal Vol. 38, 8, 1465-1470, August 2000.
Chattopadhyay, A., Liu, Q. and Gu, H., “Vibration Reduction in Rotor Blades Using Active Composite Box Beam,” AIAA Journal, Vol. 38, 7, 1125-1131, July 2000.
Gu, H. and Chattopadhyay, A., “Three Dimensional Elasticity Solution of Composite Plates,” Composite Structures, Vol. 50, 1, 29-35, 2000.
Talya, S., Rajadas, J. N. and Chattopadhyay, A., “Multidisciplinary Optimization of Gas Turbine Airfoil Design,” Inverse Problems in Engineering, Vol. 8, 283-308, 2000.
Chattopadhyay, A. and Radu, A. G., “Dynamic Instability of Composite Laminates Using a Higher Order Theory,” Computers and Structures, Vol. 77 (5), 453-460, Oct. 2000.
1999
Chattopadhyay, A. and Jha, R., “Multidisciplinary Optimization of Composite Wings using Refined Structural and Aeroelastic Analyses Methodologies,” Engineering Optimization, Vol. 32 (1), 59-78, 1999.
Chattopadhyay, A., Nam, C. and Dragomir-Daescu, D., “Delamination Modeling and Detection in Smart Composite Plates,” J. of Reinforced Plastics and Composites, Vol. 18, 17, 1557-1572, 1999.
Chattopadhyay, A., Li, J. and Gu, H., “Coupled Thermo-Piezoelectric-Mechanical model for Smart Composites,” AIAA Journal, Vol. 37, 12, 1633-1638, Dec.1999.
Chattopadhyay, A., Gu, H. and Liu, Q., “Modeling of Smart Composite Box Beams with Nonlinear Induced Strain,” Composites Part B Engineering, Vol. 30 (6), 603-612, 1999.
Talya, S., Rajadas, J. N. and Chattopadhyay, A., “Multidisciplinary Design Optimization of Film-cooled Gas Turbine Blades,” Mathematical Problems in Engineering, Vol. 5, 2, 97-119, 1999.
Chattopadhyay, A., Gu, H. and Dragomir-Daescu, D., “Dynamics of Delaminated Composite Plates with Piezoelectric Actuators,” AIAA Journal, Vol. 37, 2, 248-254, Feb. 1999.
Chattopadhyay, A., Seeley, C. E. and Jha, R., “Aeroelastic Tailoring using Piezoelectric Actuation and Hybrid Optimization,” Smart Materials and Structures , Vol. 8, 1, 83-91, Feb. 1999.
Gu, H. and Chattopadhyay, A., “An Experimental Investigation of Delamination Buckling and Postbuckling of Composite Laminates,” Composite Science and Technology, Vol. 59, 6, 903-910, 1999.
Chattopadhyay, A., Dragomir-Daescu, D. and Gu, H., “Dynamics of Delaminated Smart Composite Cross-Ply Beams,” Smart Materials and Structures, Vol. 8, 1, 92-99, Feb. 1999.
Seeley, C. E. and Chattopadhyay, A., “Modeling of Adaptive Composites Including Debonding,” Int. Journal of Solids and Structures, Vol. 36, 12, 1823-1843, April 1999.
1998
Gu, H. and Chattopadhyay, A., “Elasticity Solution of Polymeric Piezoelectric C-Block Composite Actuator,” Journal of Intelligent Material System and Structures, Vol. 9, 704-712, Sept. 1998.
Rajadas, J. N, Jury, R. A. and. Chattopadhyay, A., “Enhanced Multiobjective Technique for Multidisciplinary Design Optimization,” Journal of Aircraft, Vol. 35, 5, 828-830, Sept.–Oct. 1998.
Seeley, C. E. and Chattopadhyay, “Experimental Investigation of Composite Beams with Piezoelectric Actuation and Debonding,” Smart Materials and Structures, Vol. 7, 502-511, August 1998.
Chattopadhyay, A. and Gu, H., “Elasticity Approach for Delamination Buckling of Composite Beam Plates,” AIAA Journal, Vol. 36, 8, 1529-1534, August 1998.
McCarthy, T. R. and Chattopadhyay, A., “Investigation of Composite Box Beam Dynamics using a Higher Order Theory,” Composite Structures, Vol. 41, 3-4, 273-284, March-April 1998.
Rajadas, J. N., Chattopadhyay, A. and Pagaldipti, N., “Multidisciplinary Optimization Procedure for High Speed Aircraft Using Semi-Analytical Sensitivity Analysis Procedure and Multilevel Decomposition,” Engineering Optimization, Vol. 31, 25-51, 1998.
Narayan, J. R., Chattopadhyay, A., Pagaldipti, N. and Zhang S., “Shape Optimization of Turbine Blades with the Integration of Aerodynamics and Heat Transfer,” Mathematical Problems in Engineering, Vol. 4, 21-42, 1998.
1997
McCarthy, T. R. and Chattopadhyay, A., “A Refined Higher-Order Composite Box Beam Theory,” Composites Part B, Vol. 28, 5-6, 523-534, 1997.
Seeley, C. E., Chattopadhyay, A. and Mitchell, L., “Design of Smart Flap using C-block Actuators and a Hybrid Optimization Technique,” Smart Materials and Structures, Vol. 6, 134-144, 1997.
Chattopadhyay, A. and Seeley, C. E., “A Higher Order Theory for Modeling Composite Laminates with Induced Strain Actuators,” Composites Part B, 28B, 243-252, 1997.
1996
Narayan, J. R., Chattopadhyay, A. and Pagaldipti, N., “Optimization Procedure with Analytical Aerodynamic Sensitivity for Reduced Sonic Boom Design,” Journal of Aircraft, Vol. 33, 6, 1123 -1130, 1996.
McCarthy, T. R. and Chattopadhyay, A., “A Coupled Rotor/Wing Optimization Procedure for High Speed Tilt Rotor Aircraft,” Journal of the American Helicopter Society, Vol. 41, 4, 360 – 369, 1996.
Chattopadhyay, A. McCarthy, T. R. and Seeley, C. E., “Multiple Design Point Optimization of High Speed Proprotors,” Journal of Aircraft, Vol. 33, 3, 625-627, 1996.
Pagaldipti, N. and Chattopadhyay, A., “A Discrete Semi-Analytical Procedure for Aerodynamic Sensitivity Analysis Including Grid Sensitivity,” Computers and Mathematics with Applications, Vol. 32, 3, 61-71, 1996.
Chattopadhyay, A. and Gu, H., “Delamination Buckling and Postbuckling of Composite Cylindrical Shells,” AIAA Journal, Vol. 34, 6, 1279-1286, 1996.
Seeley, C. E., Chattopadhyay, A. and Brei, D., “Development of a Polymeric Piezoelectric C-Block Actuator Using a Hybrid Optimization Technique,” AIAA Journal, Vol. 34, 1, 123-128, 1996.
Chattopadhyay, A. and Gu, H., “Exact Elasticity Solution for Buckling of Composite Laminates,” Composite Structures, Vol. 34, 3, 291-299, 1996.
1995
Chattopadhyay, A. and Seeley, C. E., “A Coupled Controls/Structures Optimization Procedure for the Design of Rotating Composite Box Beams with Piezoelectric Actuators,” Smart Materials and Structures, Vol. 4, 170-178, 1995.
Chattopadhyay, A. and Guo, R., “Development of a Finite-Element-Based Design Sensitivity Analysis For Buckling and Postbuckling of Composite Plates,” Mathematical Problems in Engineering, Vol. 1, 254-274, 1995.
Chattopadhyay, A. and Guo, R., “Structural Design Sensitivity Analysis for Composites Undergoing Elastoplastic Deformation,” Mathematical and Computer Modelling, Vol. 22, 2, 83- 105, 1995.
Chattopadhyay, A. and Gu, H., “Modeling of Delamination Buckling in Composite Cylindrical Shells with a New Higher-Order Theory,” Composites Science and Technology, Vol. 54, 223- 232, 1995.
McCarthy, T. R., Chattopadhyay, A., Talbot, P. and Madden, J. F., III, “A Performance Based Optimization Procedure for High Speed Prop-rotors,” Journal of the American Helicopter Society, Vol. 40, 3, 92-100, 1995.
Chattopadhyay, A., McCarthy, T. R. and Seeley, C. E., “Decomposition-Based Optimization Procedure for High-Speed Prop-Rotors Using Composite Tailoring,” Journal of Aircraft, Vol. 32, 5, 1026-1033, 1995.
Chattopadhyay, A. and Pagaldipti, N., “A Multidisciplinary Optimization using Semi-Analytical Sensitivity Analysis Procedure and Multilevel Decomposition,” Computers and Mathematics with Applications, Vol. 29, 7, 55-66, 1995.
Chattopadhyay, A., McCarthy, T. R., and Pagaldipti, N., “Multilevel Decomposition Procedure for Efficient Design Optimization of Helicopter Rotor Blades”, AIAA Journal, Vol. 33, 2, 223-230, 1995.
Chattopadhyay, A., McCarthy, T. R. and Madden, J. F., III, “A Design Optimization Procedure for Minimizing Drive System Weight of High Speed Prop Rotors,” Engineering Optimization, Vol. 23, 239-254, 1995.
Ferreira, J. M., Chattopadhyay, A. and Pringnitz, S. J., “Development of a Multiobjective Optimization Procedure for Reducing Edge Delamination Stresses in Composite Plates,” Computers and Mathematics with Applications, Vol. 29, 6, 81-97, 1995.
1994
Seeley, C. E. and Chattopadhyay, A., “A Simulated Annealing Technique for Development of Multiobjective Optimization of Intelligent Structures,” Smart Materials and Structures, Vol. 3, 98-106, 1994.
Chattopadhyay, A. and Gu H., “New Higher-Order Plate Theory in Modeling Delamination Buckling of Composite Laminates,” AIAA Journal, Vol. 32, 8, 1709-1716, 1994.
Ferreira, J. M. and Chattopadhyay, A., “An Optimization Procedure for Maximizing the Energy Absorption Capability of Composite Shells,” Mathematical and Computer Modeling, Vol. 19, 2, 61-74, 1994.
Chattopadhyay, A. and McCarthy, T. R., “Design of High Speed Prop-Rotors using Multiobjective Optimization Techniques,” Engineering Optimization, Vol. 23, 155-172, 1994.
Chattopadhyay, A., McCarthy, T. R. and Madden, J. F., III, “An Optimization Procedure for the Design of Prop Rotors in High Speed Cruise Including the Coupling of Performance, Aeroelastic Stability and Structures,” Mathematical and Computer Modelling, Rotorcraft Modelling: Part II, Vol. 19, 3-4, 75-88, 1994.
Chattopadhyay, A. and Seeley, C. E., “A Multiobjective Design Optimization Procedure for Control of Structures using Piezoelectric Materials,” Journal of Intelligent Material Systems and Structures, Vol. 5, 3, 403-411, 1994.
Chattopadhyay, A. and Narayan, J. R., “An Optimization Procedure for the Design of High-Speed Prop-Rotors,” Journal of Aerospace Engineering, Vol. 7, 2, 143-155, 1994.
1993
Seeley, C. E. and Chattopadhyay, A., “The Development of an Optimization Procedure for the Design of Intelligent Structures”, Smart Materials and Structures, Vol. 2, 135-146, 1993.
Chattopadhyay, A. and Narayan, J. R., “Optimum Design of High-Speed Prop-Rotors using a Multidisciplinary Approach,” Engineering Optimization, Vol. 22, 1-17, 1993.
Chattopadhyay, A., McCarthy, T. R. and Madden, J. F., III, “Structural Optimization of High Speed Prop Rotors Including Aeroelastic Stability Constraints,” Mathematical and Computer Modelling, Rotorcraft Modelling: Part I, Vol. 18, 3-4, 101-113,1993.
Chattopadhyay, A., Pagaldipti, N. and Chang, K. T., “A Design Optimization Procedure for Efficient Turbine Airfoil Design,” Computers and Mathematics with Applications, Vol. 26, 4, 21 -31, 1993.
Chattopadhyay, A. and McCarthy, T. R., “Multidisciplinary Optimization and Design Variable Sensitivity of Helicopter Rotor Blades using a Composite Box Beam Model,” Composites Engineering, Vol. 3, 7-8, 585-599, 1993.
Chattopadhyay, A., “Performance of an Optimized Rotor Blade at Off-Design Flight Conditions,” Engineering Optimization, Vol. 21, 1, 35-50, 1993.
Chattopadhyay, A. and Ferreira, J. M., “Design Sensitivity and Optimization of Composite Cylinders,” Composites Engineering, Vol. 3, 2, 169-179, 1993.
Chattopadhyay, A. and McCarthy, T. R., “A Multidisciplinary Optimization Approach for Vibration Reduction in Helicopter Rotor Blades,” Computers and Mathematics with Applications, Vol. 25, 2, 59-72, 1993.
1992
Chattopadhyay, A. and Jones, H., “Dynamics of an Optimized Rotor at Off-Design Flight Conditions,” Journal of Aircraft, Vol. 29, 2, 294-296, 1992.
Chattopadhyay, A. and Chiu, Y. D., “An Enhanced Integrated Aerodynamic/Dynamic Approach to Optimum Rotor Blade Design,” Structural Optimization, Vol. 4, 75-84, 1992.
Chattopadhyay, A., “Vibration Reduction in an Articulated Rotor Blade using Structural Optimization,” Engineering Optimization, Vol. 19, 37-50, 1992.
1991
Chattopadhyay, A., Walsh, J. L. and Riley, M. F., “Integrated Aerodynamic Load/Dynamic Optimization of Helicopter Rotor Blades,” Journal of Aircraft, Special issue on “Multidisciplinary Optimization of Aeronautical Systems,” Vol. II, 58-65, 1991.
1990
Chattopadhyay, A. and Walsh, J. L., “Application of Optimization Methods to Helicopter Rotor Blade Design,” Structural Optimization, Vol. 2, 11-22, Springer-Verlag, 1990.
Chattopadhyay, A. and Walsh, J. L., “Minimum Weight Design of Rotorcraft Blades with Multiple Frequency and Stress Constraints,” AIAA Journal, Vol. 28, 3, 565-567, 1990.
1989
Chattopadhyay, A. and Walsh, J. L., “Minimum Weight Design of Helicopter Rotor Blades with Frequency Constraints,” Journal of the American Helicopter Society, Vol. 34, 77-82, 1989.
1987
Hanagud, S. V., Chattopadhyay, A. and Smith, C. V., “Optimal Design of Vibrating Beam with Coupled Bending and Torsion,” AIAA Journal, Vol. 25, 9, 1231-1240, 1987.